• L14-S14 – BP – PVC

    Load capacity up to 125Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • L14-S14 – C – CELERON

    Load capacity up to 300Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    C – Celeron Hardness: 103 Rockwell M. (-30°C to +120°C).

    Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h.

  • L14-S14 – F – CAST IRON

    Load capacity up to 300Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).

    Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.

  • L14-S14 – NP – POLYPROPYLENE

    Load capacity up to 165Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    RODA

    NP – Polypropylene Hardness: 65 Shore D. (-20°C to +70°C).

    Injected with recyclable polypropylene copolymer wheel center and tread. Indicated for light and medium loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h. Produced with recycled materials.

  • L14-S14 – NU – MOLDED POLYURETHANE

    Load capacity up to 165Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    NU – Molded polyurethane with Nylon Wheel Center. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and injected nylon wheel center. The mechanical bond system ensures excellent resistance and service life. Ideal for applications on various surfaces and environment types. They are light, withstand high loads, protect the floor, require less effort to handle and produce low noise level during handling. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They may be used in a speed up to 4km/h.

  • L14-S14 – P – MOLDED POLYURETHANE

    Load capacity up to 300Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h.

  • L14-S14 – PMN – MOLDED RUBBER

    Load capacity up to 120Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    RODA

    PMN – Molded Rubber With Polypropylene Whell Center: 80 Shore A. (-20°C to +70°C).

    Produced with solid rubber tread, with injected polypropylene wheel center. They are light and resistant, withstand humidity, have a soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.

  • L14-S14 – SP – SOFT RUBBER

    Load capacity up to  125Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10°C to +50°C).

    Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.

  • L14-S14 – TB – THERMOPLASTIC RUBBER

    Load capacity up to 125Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    RODA

    TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20°C to +70°C).

    Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.

  • L14-S14 – TP – THERMOPLASTIC COMPOUND

    Load capacity up to 150Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • L14-S14 – UP – THERMOPLASTIC POLYURETHANE

    Load capacity up to 165Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).

    Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.

  • L16 – BP – PVC

    Load capacity up to 200Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • L16 – NP – POLYPROPYLENE

    Load capacity up to 250Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    NP – Polypropylene Hardness: 65 Shore D. (-20°C to +70°C).

    Injected with recyclable polypropylene copolymer wheel center and tread. Indicated for light and medium loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h. Produced with recycled materials.

  • L16 – TB – THERMOPLASTIC RUBBER

    Load capacity up to 210Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle

    WHEEL

    SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10°C to +50°C).

    Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.

  • L16 – TP – THERMOPLASTIC COMPOUND

    Load capacity up to 210Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • L16 – UP – THERMOPLASTIC POLYURETHANE

    Load capacity up to 250Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).

    Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.

  • LA10 Caster SChioppa – BP – PVC

    Load capacity up to até 40Kg

    RIG

    Made of stamped steel with single ball raceway and a Chrome-Plated finish. Rivetted wheel axle.

    Wheel

    This series has all types of thermoplastic wheels.

  • Ball Caster Schioppa
    Schioppa Ball Caster – NP Polypropylene

    Load capacity up to 40Kg

    RIG

    Made of stamped steel with single ball raceway and a Chrome-Plated finish. Rivetted wheel axle.

    Wheel

    NP – Polypropylene Hardness: 65 Shore D. (-20°C to +70°C)

    Injected with recyclable polypropylene copolymer wheel center and tread. Indicated for light and medium loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h. Produced with recycled materials.

  • Schioppa CMX-CPX Caster – B – MOLDED RUBBER

    Load capacity up to 1000Kg

    RIG

    Reinforced rig with an anti-shock spring system, manufactured in thick carbon steel with stamped and machined parts, swivel section with axial ball bearing and tapered roller bearing. Painted finishing. Bolted wheel axle.

    Wheel

    B – Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).

    Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • Schioppa CMX-CPX Caster – BS – MOLDED DOUBLE RUBBER

    Load capacity up to 2000Kg

    RIG

    Reinforced rig with an anti-shock spring system, manufactured in thick carbon steel with stamped and machined parts, swivel section with axial ball bearing and tapered roller bearing. Painted finishing. Bolted wheel axle.

    Wheel

    BS – Double-Layered Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).

    Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.

Showing 41–60 of 223 results