• Rodízio GSC-GMC F Schioppa
    Schioppa GSC-GMC Caster – F – CAST IRON

    Load capacity up to 700Kg

    RIG

    Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).

    Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.

  • Rodízio GSC-GMC P Schioppa
    Schioppa GSC-GMC Caster- P – MOLDED POLYURETHANE

    Load capacity up to 700Kg

    RIG

    Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h.

  • GMPX83BSE
    Schioppa MPX Caster – Heavy Medium Axial – BS – MOLDED DOUBLE RUBBER

    Load capacity up to 900Kg

    RIG

    Reinforced, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.

    Wheel

    BS – Double-Layered Molded Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).

    Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 4km/h.

  • GMPX83CE
    Schioppa MPX Caster – Heavy Medium Axial – C – CELERON

    Load capacity up to 1000Kg

    RIG

    Reinforced, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.

    Wheel

    C – Celeron Hardness: 103 Rockwell M. (-30°C to +120°C).

    Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h

  • GMPX83FE
    Schioppa MPX Caster – Heavy Medium Axial – F – CAST IRON

    Load capacity up to 1400Kg

    RIG

    Reinforced, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.

    Wheel

    F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).

    Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.

  • GMPX83PE
    Schioppa MPX Caster – Heavy Medium Axial – P – MOLDED POLYURETHANE

    Load capacity up to 1400Kg

    RIG

    Reinforced, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.

    Wheel

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h.

  • GGPMX3508PCR
    Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PC

    Load capacity up to 300Kg

    RIG

    Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.

    Wheel

    PC – Pneumatic – Stamped Plate Wheel Center (-20°C to +50°C).

    Manufactured with tire and tube, with painted stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4 km/h.

  • GGPMX3508PPR
    Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PP

    Load capacity up to 220Kg

    RIG

    Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.

    Wheel

    PP – Pneumatic – Nylon Wheel Center. (-20°C to +50°C).

    Manufactured with tire and tube and nylon injected wheel center. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.

  • GGPMX3308PMR
    Schioppa PMX Caster – Solid Tire Axial – PMR – SOLID TIRE

    Load capacity up to 500Kg

    RIG

    Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.

    Wheel

    PMX – Solid Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).

    Produced with black solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws, enabling the mounting and replacement of their components that may be supplied separately.

  • GPX83BE
    Schioppa PX Caster – Super Heavy Axial – B – MOLDED RUBBER

    Load capacity up to 750Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    B – Molded Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).

    Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • GPX83BSE
    Schioppa PX Caster – Super Heavy Axial – BS – MOLDED DOUBLE RUBBER

    Load capacity up to 900Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    BS – Double-Layered Molded Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).

    Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • GPX83CE
    Schioppa PX Caster – Super Heavy Axial – C – CELERON

    Load capacity up to 1000Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    C – Celeron Hardness: 103 Rockwell M. (-30°C to + 120°C).

    Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h

  • GPX83FE
    Schioppa PX Caster – Super Heavy Axial – F – CAST IRON

    Load capacity up to 1400Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    F – Cast Iron. Hardness: 160 Brinell. (-40°C to + 400°C). Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.

  • nm-nylon
    Schioppa PX Caster – Super Heavy Axial – NM – SOLID NYLON

    Load capacity up to 1400Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    NM – Solid Nylon. Hardness: 70 Shore D. (-40°C to + 110°C).

    Produced from nylon 6.0 bars. They are light weight, with a good mechanical resistance, roll very easily, requiring less effort in handling and maneuvering, under static loads are resistant to deformation. They withstand light and heavy loads maintaining equipment handling easiness. Ideal for applications in wet environments, they are resistant to chemicals, greases, oils, salts and some kind of acids. Nominal working speed is up to 4km/h.

  • GPX83PE
    Schioppa PX Caster – Super Heavy Axial – P – MOLDED POLYURETHANE

    Load capacity up to 1400Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to + 80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • YGPEXBE
    Schioppa YPEX Caster – B – MOLDED RUBBER

    Load capacity up to 2000Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    B – Molded Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).

    Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • YGPEXFE
    Schioppa YPEX Caster – F – CAST IRON

    Load capacity up to 3800Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    F – Cast Iron. Hardness: 160 Brinell. (-40°C to + 400°C).

    Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.

  • YGPEXPE
    Schioppa YPEX Caster – P – MOLDED POLYURETHANE

    Load capacity up to 3800Kg

    RIG

    Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.

    Wheel

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to + 80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.

Showing 101–118 of 118 results