-
Schioppa GSA-GMA Caster – STR – THERMOPLASTIC RUBBER
Load capacity up to 250Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
STR – Thermoplastic Rubber. Hardness: 70 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic rubber tread and polypropylene copolymer center. Wheel tread profile has a grooved pattern enabling a better adherence in external and internal floors. They offer a soft and quiet rolling, excellent floor protection, good chemical resistance, and wear and impact resistance. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – TB – THERMOPLASTIC RUBBER
Load capacity up to 300Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – TP – THERMOPLASTIC COMPOUND
Load capacity up to 300Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10°C to +50°C).
Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – UP – THERMOPLASTIC POLYURETHANE
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – AC – MOLDED POLYURETHANE
Capacity up to 700Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
AC – Molded High Hardness Polyurethane – Round. Hardness: 60 Shore D. (-40°C to +80°C).
Produced with a high hardness molded green polyurethane tread over a grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to their polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. Nominal working speed is up to 20km/h.
-
Schioppa MX Caster – Axial Medium – B – MOLDED RUBBER
Load capacity up to 450Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
B – Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa MX Caster – Axial Medium – BC – MOLDED POLYURETHANE
Load capacity up to 900Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
BC – Molded Polyurethane – Round. Hardness: 90 Shore A. (-40°C to +80°C).
Produced with a molded polyurethane tread and grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to their polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa MX Caster – Axial Medium – BP – PVC
Load capacity up to 400Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to +50°C).
Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – BS – MOLDED DOUBLE BLUE RUBBER
Load capacity up to 500Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
BS – Double-Layered Molded Rubber Blue. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa MX Caster – Axial Medium – BS – MOLDED DOUBLE RUBBER
Load capacity up to 500Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
BS – Double-Layered Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa MX Caster – Axial Medium – C – CELERON
Load capacity up to 800Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
C – Celeron Hardness: 103 Rockwell M. (-30°C to +120°C).
Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – F – CAST IRON
Load capacity up to 900Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle.
Wheel
F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).
Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.
-
Schioppa MX Caster – Axial Medium – ME – MOLDED POLYURETHANE
Load capacity up to 700Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
ME – Double tread Molded Polyurethane – Round. Hardness: side 60 Shore D and center 90 Shore A. (-40°C to +80°C).
Produced with a double tread molded polyurethane, with green colored high hardness cheeks and softer orange colored polyurethane center, over a grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to its polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. Higher hardness wheel side faces allow for a higher resistance to impacts and a softer center a higher floor friction with a lower handling noise level. They may be employed in a speed up to 10km/h on floors that are not contaminated with grease or slippery liquids.
-
Schioppa MX Caster – Axial Medium – NT – TECHNICAL NYLON
Load capacity up to 900Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
NT – Technical Nylon. Hardness: 75 Shore D. (-40°C to +110°C).
Produced with high quality nylon 6.0 tread and wheel center. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – P – MOLDED POLYURETHANE
Load capacity up to 900Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).
Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa MX Caster – Axial Medium – TB – THERMOPLASTIC RUBBER
Load capacity up to 400Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – TP – THERMOPLASTIC COMPOUND
Load capacity up to 400Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
RODA
TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10°C to +50°C).
Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – UP – THERMOPLASTIC POLYURETHANE
Load capacity up to 700Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.
-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PC
Load capacity up to 300Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PC – Pneumatic – Stamped Plate Wheel Center (-20°C to +50°C).
Manufactured with tire and tube, with painted stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4 km/h.
-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PP
Load capacity up to 220Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PP – Pneumatic – Nylon Wheel Center. (-20°C to +50°C).
Manufactured with tire and tube and nylon injected wheel center. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
Showing 61–80 of 94 results
