Load capacity up to 100Kg
RIG
NR – Injected Hub
Load capacity up to 100Kg
RIG
NR – Injected Hub
Load capacity up to 100Kg
RIG
NR – Injected Hub
download-catalogo | www.uol.com.br |
---|
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
C – Celeron Hardness: 103 Rockwell M. (-30°C to +120°C).
Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h.
Load capacity up to 250Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
STR – Thermoplastic Rubber. Hardness: 70 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic rubber tread and polypropylene copolymer center. Wheel tread profile has a grooved pattern enabling a better adherence in external and internal floors. They offer a soft and quiet rolling, excellent floor protection, good chemical resistance, and wear and impact resistance. Nominal working speed is up to 4km/h.
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
RODA
BC – Molded Polyurethane – Round. Hardness: 90 Shore A. (-40°C to +80°C).
Produced with a molded polyurethane tread and grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to their polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h when mounted with ball bearings.
Load capacity up to 150Kg
RIG
Stamped rig with double ball raceway, white zinc-plated and yellow zinc-plated finishing.
Wheel
N – Fiberglass-reinforced Nylon. Hardness: 80 Shore D
Produced with fiberglass-reinforced nylon 6.6. Indicated for utilization in high and low temperature applications. They are light and have an excellent mechanical resistance, rolling very easily, and requiring less effort in maneuvering and handling. Resistant to grease, oils, and some kinds of acids. Z – Zamak. Hardness: 115 Brinell. Produced with zamak, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.