soon
TM – Termic. Hardness: 90 Shore D. (0ºC to + 200ºC). Manufactured in phenolic resin (bakelite), molded by heat and pressure. Indicated for utilization in high temperature environment applications. They have good mechanical properties, resistant to deformation under static loads and roll easily. They are resistant to most chemicals.
P – Molded Polyurethane. Hardness: 90 Shore A. (-40ºC to + 80ºC). Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surface and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
B – Molded Rubber. Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
PMX – Rubber (Rim) Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws enabling the mounting and replacement of their components that may be supplied separately.