soon
PHP – Molded Polyurethane – High Performance. Hardness: 95 Shore A. (-40ºC to + 100ºC). Produced with a molded high performance polyurethane tread and grey cast iron wheel center. Ideal for applications on various surface and environment types. They offer excellent results with towed equipment. They withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, have an excellent resistance to tearing, impacts and abrasion, with a superior service life. They have an excellent resistance to weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 30km/h when mounted with ball bearings.
BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10ºC to + 50ºC). Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
NHT – Fiberglass-reinforced Thermoplastic Compound. Hardness: 85 Shore D. (-20ºC to + 220ºC). Produced with a fiberglass-reinforced engineering thermoplastic compound. Indicated for utilization in high and low temperature applications. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Resistant to greases, oils, and some kinds of acids.
PMN – Molded Rubber With Polypropylene Whell Center: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber tread, with injected polypropylene wheel center. They are light and resistant, withstand humidity, have a soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.