RIT – Pneumatic – Stamped Plate Wheel Center (-20ºC to + 50ºC). Manufactured with tire and tube, with zinc-plated stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
NHT – Fiberglass-reinforced Thermoplastic Compound. Hardness: 85 Shore D. (-20ºC to + 220ºC). Produced with a fiberglass-reinforced engineering thermoplastic compound. Indicated for utilization in high and low temperature applications. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Resistant to greases, oils, and some kinds of acids.
PMX – Rubber (Rim) Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws enabling the mounting and replacement of their components that may be supplied separately.
SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10ºC to + 50ºC). Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.