soon
BD – Molded Rubber With Stamped Plate Wheel Center: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber tread, with zinc-plated stamped carbon steel wheel center. They are light and resistant, soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.
SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10ºC to + 50ºC). Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.
PMX – Rubber (Rim) Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws enabling the mounting and replacement of their components that may be supplied separately.
PAC – Molded Polyurethane – High Hardness. Hardness: 60 Shore D. (-40ºC to + 80ºC). Produced with a high hardness molded polyurethane tread and grey cast iron wheel center. Ideal for more severe applications on various surface and environment types. They withstand heavy loads, protect the floor, requiring less effort to be handled, enabling equipment maneuvering and handling. They produce a low noise level when rolling and have an excellent service life. They have an excellent mechanical resistance and are resistant to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h when mounted with ball bearings.