B – Molded Rubber. Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
BMN – Solid Tire – Nylon Wheel Center. Hardness: 80 Shore A. (-20ºC to + 70ºC). Manufactured with a solid rubber rim and injected nylon wheel center. Indicated for applications in irregular floors where handling easiness, impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately.
BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10ºC to + 50ºC). Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
PAC – Molded Polyurethane – High Hardness. Hardness: 60 Shore D. (-40ºC to + 80ºC). Produced with a high hardness molded polyurethane tread and grey cast iron wheel center. Ideal for more severe applications on various surface and environment types. They withstand heavy loads, protect the floor, requiring less effort to be handled, enabling equipment maneuvering and handling. They produce a low noise level when rolling and have an excellent service life. They have an excellent mechanical resistance and are resistant to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h when mounted with ball bearings.