-
Schioppa Wheel NHT – FIBERGLASS-REINFORCED THERMOPLASTIC COMPUND
NHT – Fiberglass-reinforced Thermoplastic Compound. Hardness: 85 Shore D. (-20ºC to + 220ºC). Produced with a fiberglass-reinforced engineering thermoplastic compound. Indicated for utilization in high and low temperature applications. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Resistant to greases, oils, and some kinds of acids.
-
Schioppa Wheel NM – SOLID NYLON
NM – Solid Nylon. Hardness: 70 Shore D. (-40ºC to + 110ºC). Produced from nylon 6.0 bars. They are light weight, with a good mechanical resistance, roll very easily, requiring less effort in handling and maneuvering, under static loads are resistant to deformation. They withstand light and heavy loads maintaining equipment handling easiness. Ideal for applications in wet environments, they are resistant to chemicals, greases, oils, salts and some kind of acids. Nominal working speed is up to 4km/h.
-
Schioppa Wheel NP – POLYPROPYLENE
NP – Polypropylene Hardness: 65 Shore D. (-20ºC to + 70ºC). Injected with recyclable polypropylene copolymer wheel center and tread. Indicated for light and medium loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h. Produced with recycled materials.
-
Schioppa Wheel NPP – POLYPROPYLENE
NPP – Polypropylene. Hardness: 65 Shore D. (-20ºC to + 70ºC). Produced with single injection recyclable polypropylene copolymer. Indicated for light loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h.
-
Schioppa Wheel NT – TECHNICAL NYLON
NT – Technical Nylon. Hardness: 75 Shore D. (-40ºC to + 110ºC). Produced with high quality nylon 6.0 tread and wheel center. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.
-
Schioppa Wheel NTT – TECHNICAL NYLON
NTT – Technical Nylon. Hardness: 75 Shore D. (-40ºC to + 110ºC). Produced with single injection high quality polyamide nylon 6.0. They are light weight, with a good mechanical resistance, roll very easily, requiring less effort in handling and maneuvering, under static loads they are resistant to deformation. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.
-
Schioppa Wheel NU – POLYURETHANE MOLDED
NU – Molded polyurethane with Nylon Wheel Center. Hardness: 90 Shore A. (-40ºC to + 80ºC). Produced with a molded polyurethane tread and injected nylon wheel center. The mechanical bond system ensures excellent resistance and service life. Ideal for applications on various surface and environment types. They are light, withstand high loads, protect the floor, require less effort to handle and produce low noise level during handling. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They may be used in a speed up to 4km/h.
-
Schioppa Wheel P – POLYURETHANE MOLDED
P – Molded Polyurethane. Hardness: 90 Shore A. (-40ºC to + 80ºC). Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surface and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa Wheel PAC – POLYURETHANE MOLDED
PAC – Molded Polyurethane – High Hardness. Hardness: 60 Shore D. (-40ºC to + 80ºC). Produced with a high hardness molded polyurethane tread and grey cast iron wheel center. Ideal for more severe applications on various surface and environment types. They withstand heavy loads, protect the floor, requiring less effort to be handled, enabling equipment maneuvering and handling. They produce a low noise level when rolling and have an excellent service life. They have an excellent mechanical resistance and are resistant to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h when mounted with ball bearings.
-
Schioppa Wheel PC – PNAUMATIC
PC – Pneumatic – Stamped Plate Wheel Center (- 20ºC to + 50ºC). Manufactured with tire and tube, with painted stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4 km/h.
-
Schioppa Wheel PHP – POLYURETHANE MOLDED
PHP – Molded Polyurethane – High Performance. Hardness: 95 Shore A. (-40ºC to + 100ºC). Produced with a molded high performance polyurethane tread and grey cast iron wheel center. Ideal for applications on various surface and environment types. They offer excellent results with towed equipment. They withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, have an excellent resistance to tearing, impacts and abrasion, with a superior service life. They have an excellent resistance to weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 30km/h when mounted with ball bearings.
-
Schioppa Wheel PMN – SOLID TIRE
PMN – Molded Rubber With Polypropylene Whell Center: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber tread, with injected polypropylene wheel center. They are light and resistant, withstand humidity, have a soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.
-
Schioppa Wheel PMX – SOLID TIRE
PMX – Rubber (Rim) Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws enabling the mounting and replacement of their components that may be supplied separately.
-
Schioppa Wheel R – SOLID TIRE
R – Molded Rubber With Stamped Plate Wheel Center: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber tread, with zinc-plated stamped carbon steel wheel center. They are light and resistant, soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.
-
Schioppa Wheel RIT – PNAUMATIC
RIT – Pneumatic – Stamped Plate Wheel Center (-20ºC to + 50ºC). Manufactured with tire and tube, with zinc-plated stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
-
Schioppa Wheel SP – Soft Rubber
SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10ºC to + 50ºC). Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.
-
Schioppa Wheel TB – THERMOPLASTIC RUBBER
TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.
-
Schioppa Wheel TM – TERMIC
TM – Termic. Hardness: 90 Shore D. (0ºC to + 200ºC). Manufactured in phenolic resin (bakelite), molded by heat and pressure. Indicated for utilization in high temperature environment applications. They have good mechanical properties, resistant to deformation under static loads and roll easily. They are resistant to most chemicals.
-
Schioppa Wheel TP – THERMOPLASTIC COMPOUND
TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10ºC to + 50ºC). Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa Wheel TRANSPALLET – RCNT – CARGO WHEEL
RCNT – Transpallet Nylon – Cargo Wheel. Hardness: 70 Shore D. (-40ºC to + 110ºC). Produced from a single high quality polyamide nylon 6.0 injection, they are designed to be mounted as transpallet cargo wheels. They are light weight, with a good mechanical resistance, roll very easily, requiring less effort in handling and maneuvering, hold heavy loads and are resistant to deformation under static loads. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.
Showing 181–200 of 223 results
