• GCMX82PE
    Schioppa CMX-CPX Caster – P – MOLDED POLYURETHANE

    Load capacity up to 2000Kg

    RIG

    Reinforced rig with an anti-shock spring system, manufactured in thick carbon steel with stamped and machined parts, swivel section with axial ball bearing and tapered roller bearing. Painted finishing. Bolted wheel axle.

    Wheel

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • Colorgel Caster Schioppa
    Schioppa Colorgel Caster – Transparent Thermoplastic Polyurethane

    Load capacity up to 60Kg

    RIG

    Made of stamped steel with single ball raceway and a Chrome-Plated finish. Rivetted wheel axle.

    Wheel

    Colorgel – Transparent Thermoplastic Polyurethane Hardness: 90 Shore A. (-20°C to +70°C).

    Injected with a polyurethane lining and acrylic wheel center with several combinations of colors. Indicated for furniture, rolling very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Produced with recycled materials.

  • decorativo
    Schioppa Decorative Caster – NPP Polypropylene

    Load capacity up to 40Kg

    RIG

    Made of nylon with several color options. Swiveling is done by a central ball point. Crimp wheel axle.

    Wheel

    NPP – Polypropylene. Hardness: 65 Shore D. (-20°C to +70°C).

    Produced with single injection recyclable polypropylene copolymer. Indicated for light loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h.

  • GDE124BSE
    Schioppa DOLLY Caster – Extra Axial – DE/DERX – BS – MOLDED DOUBLE RUBBER

    Load capacity up to 3600Kg

    RIG

    DE: Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing. Bolted wheel axle. DERX: Reinforced rig, made of carbon steel, swivel section with two ball bearing and taper roller bearings . Painted finishing. Bolted wheel axle.

    Wheel

    BS – Double-Layered Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).

    Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • GDE124PE
    Schioppa DOLLY Caster – Extra Axial – DE/DERX – P – MOLDED POLYURETHANE

    Load capacity up to 6000Kg

    RIG

    DE: Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing. Bolted wheel axle. DERX: Reinforced rig, made of carbon steel, swivel section with two ball bearing and taper roller bearings . Painted finishing. Bolted wheel axle.

    Wheel

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • GMPX63BR
    Schioppa Environmental Caster – GMS

    Load capacity up to 400Kg

    RIG

    Rigid Caster.

     

  • GSA82PMN
    Schioppa Environmental Caster – PMN

    Load capacity up to 140Kg

    RIG

    Swivel Caster, Swivel Caster w/ brake

  • RodaPMP200
    Schioppa Environmental Caster – PMP

    Load capacity up to 200Kg

    WHEEL

    PMP – Solid Tire – Polypropilene Core Hardness: 80 Shore A. (-20°C to +70°C).

    Manufactured with a solid rubber rim and injected polypropilene wheel center. Indicated for waste collect container applications. Indicated for irregular floors where handling easiness, impact and vibration damping is required. They offer an easy maintenance.

  • GKSR62ACE
    Schioppa ERGONOMIC Caster – AC – MOLDED POLYURETHANE

    Load capacity up to 800Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    AC – Molded High Hardness Polyurethane – Round. Hardness: 60 Shore D. (-40°C to +80°C).

    Produced with a high hardness molded green polyurethane tread over a grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to their polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. Nominal working speed is up to 20km/h.

  • ergonomic_b
    Schioppa ERGONOMIC Caster – B – MOLDED RUBBER

    Capacity up to 450Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    B – Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).

    Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • GKSR62BCE
    Schioppa ERGONOMIC Caster – BC – MOLDED POLYURETHANE

    Load capacity up to 800Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    BC – Molded Polyurethane – Round. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to their polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents.They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • GKSR62BPE
    Schioppa ERGONOMIC Caster – BP – PVC

    Load capacity up to 400Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • FKMP-83-CE
    Schioppa ERGONOMIC Caster – C – CELERON

    Load capacity up to 800Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    C – Celeron Hardness: 103 Rockwell M. (-30°C to +120°C).

    Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h.

  • GKSR62FE
    Schioppa ERGONOMIC Caster – F – CAST IRON

    Capacity up to 900Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    RODA

    F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).

    Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.

  • GKSR62ME
    Schioppa ERGONOMIC Caster – ME – MOLDED POLYURETHANE

    Load capacity up to 800Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    RODA

    ME – Double tread Molded Polyurethane – Round. Hardness: side 60 Shore D and center 90 Shore A. (-40°C a +80°C).

    Produced with a double tread molded polyurethane, with green colored high hardness cheeks and softer orange colored polyurethane center, over a grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to its polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. Higher hardness wheel side faces allow for a higher resistance to impacts and a softer center a higher floor friction with a lower handling noise level. They may be employed in a speed up to 20km/h on floors that are not contaminated with grease or slippery liquids.

  • GKSR62NTE
    Schioppa ERGONOMIC Caster – NT – TECHNICAL NYLON

    Load capacity up to 900Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    NT – Technical Nylon. Hardness: 75 Shore D. (-40°C to +110°C).

    Produced with high quality nylon 6.0 tread and wheel center. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.

  • GKSR62NU
    Schioppa ERGONOMIC Caster – NU – MOLDED POLYURETHANE

    Load capacity up to 700Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    RODA

    NU – Molded polyurethane with Nylon Wheel Center. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and injected nylon wheel center. The mechanical bond system ensures excellent resistance and service life. Ideal for applications on various surfaces and environment types. They are light, withstand high loads, protect the floor, require less effort to handle and produce low noise level during handling. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They may be used in a speed up to 4km/h.

  • GKSR62PE
    Schioppa ERGONOMIC Caster – P – MOLDED POLYURETHANE

    Load capacity up to 900Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    RODA

    P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.

  • GKSR62SPE
    Schioppa ERGONOMIC Caster – SP – SOFT RUBBER

    Load capacity up to 400Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10°C to +50°C).

    Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.

  • GKSR62TPEB
    Schioppa ERGONOMIC Caster – TB – THERMOPLASTIC RUBBER

    Load capacity up to 400Kg

    RIG

    Reinforced without central pin, with single hardened and guarded ball raceway. Bolted wheel axle.

    Wheel

    TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20°C to +70°C).

    Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.

Showing 61–80 of 223 results