• abracadeira-de-tubo-gs-52-upe-abt-schioppa
    Abraçadeira de tubo GS 52 UPE ABT Schioppa

    Abraçadeira de tubo GS 52 UPE ABT

  • Abrazadera de tubo GS 52 UPE ABT Schioppa

    Abrazadera de tubo GS 52 UPE ABT Schioppa

  • Avantech – UP Thermoplastic Polyurethane

    Load capacity up to 150Kg

    RIG

    Manufactured with a steel internal structure and thermoplastic injected cover that protect against dust entry and ease the cleaning without removing the caster of service. The central brake system locks the swivel head and rolling wheel simultaneously in the four casters, besides a directional lock for maneuvering in difficult areas.

    Wheel

    UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).

    Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.

  • Brush Bar Parts Separator Schioppa

    Brush Bar Parts Separator Schioppa

  • bucha-para-cabeceira-cama-hospitalar-schioppa
    Bucha para Cama Hospitalar Schioppa

    Bucha para Cama Hospitalar

    Produzidas com polipropileno de alta resistência ao impacto, na cor branca. As ponteiras cobrem a fixação dos rodízios e parte da estrutura metálica, valorizando o aspecto visual do seu equipamento.

  • bumpper-cantoneira-schioppa
    Bumpper Cantoneira Schioppa

    Bumpper Cantoneira

  • bumpper-schioppa
    Bumpper Schioppa

    Bumpper Schioppa

  • Bushing for Hospital Bed

    Bushing for Hospital Bed

    Produced with high impact polypropylene, white. The tips cover the fixing of the casters and part of the metal structure, valuing the visual aspect of your equipment.

  • Cantonera Schioppa

    Cantonera Schioppa

  • Cargo Sky

    [:pb]Capacidade até 250Kg

    GARFO

    Rodízio com garfo fabricado em aço bicromatizado, com rolamento de esferas no cabeçote totalmente blindado para evitar a penetração de sujeira, além de ótima resistência a impactos.

    RODA

    NT – Nylon Técnico. Dureza: 75 Shore D. (-40ºC a +110ºC)

    Produzidas com revestimento e núcleo em nylon poliamida 6.0 de alta qualidade. São leves e possuem ótima resistência mecânica, rodam com muita facilidade exigindo menor esforço para manobras e movimentação. Ideais para aplicações em ambientes úmidos, são resistente as graxas, óleos, sais e alguns tipos de ácidos. Fabricadas com material reciclável. A velocidade de trabalho indicada é até 4 km/h.


    [:en]Load capacity up to 250kg

    RIG

    Caster with rig made of zinc-plated steel with ball bearing swivel section totally guarded to avoid dust penetration, besides an excellent resistance to impacts.

    WHEEL

    NT – Technical Nylon. Hardness: 75 Shore D. (-40ºC to + 110ºC)

    Produced with high quality nylon 6.0 tread and wheel center. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.

    [:es]Capacidad hasta 250kg

    HORQUILLA

    Rodaja con horquilla fabricada en acero bicromatado, con rodamiento de bolas en el cabezal totalmente blindado para evitar la entrada de suciedad, además de óptima resistencia a impactos.

    RUEDA

    NT – Nylon Técnico. Dureza: 75 Shore D. (-40ºC a +110ºC)

    Producidas con revestimiento y núcleo en Nylon poliamida 6.0 de alta calidad. Son ligeras, tienen óptima resistencia mecánica, ruedan con mucha facilidad exigiendo menor esfuerzo para maniobras y desplazamientos. Ideales para uso en ambientes húmedos, son resistentes a grasas, aceites, sales y algunos tipos de ácidos. Fabricadas con material reciclable. La velocidad máxima de trabajo indicada es 4km/h.

    [:]

  • Rodízio Cargo Sky Schioppa
    Cargo Sky Caster Schioppa – NT Technical Nylon

    Load capacity up to 250Kg

    RIG

    Caster with rig made of zinc-plated steel with ball bearing swivel section totally guarded to avoid dust penetration, besides an excellent resistance to impacts.

    Wheel

    NT – Technical Nylon. Hardness: 75 Shore D. (-40°C to +110°C).

    Produced with high quality nylon 6.0 tread and wheel center. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.

  • Citrus Caster Schioppa
    Citrus Caster Schioppa – Polyethylene

    Load capacity up to 60Kg

    RIG

    Made of stamped steel with single ball raceway and a Chrome-Plated finish. Rivetted wheel axle.

    Wheel

    Citrus – Polyethylene. Hardness: 80 Shore A. (-20°C to +70°C).

    Injected with a polyethylene tread and polypropylene copolymer wheel center with several combinations of colors. Indicated for furniture, they roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Produced with recycled materials.

  • Cuchillo para Cama Hospitalaria

    Cuchillo para Cama Hospitalaria

    Producidas con polipropileno de alta resistencia al impacto, en color blanco. Las puntas cubren la fijación de los rodillos y parte de la estructura metálica, valorizando el aspecto visual de su equipo.

  • ERGONOMIC – C – CELERON

    Capacidade até 800Kg

    GARFO

    Reforçado sem pino central, com pista simples de esferas endurecidas e blindadas. Eixo da roda parafusado.

    RODA

    C – Celeron. Dureza: 103 Rockwell M. (-30°C a +120°C).

    Fabricadas com composto obtido da combinação de fibras de algodão maceradas impregnadas com resina fenólica, moldado sob alta pressão e temperatura. Possuem excelentes propriedades mecânicas, são leves e resistentes, não deformam com carga estática e rodam com facilidade. Podem ser utilizada em uma larga faixa de temperaturas. São resistentes a óleos, graxas e ácidos suaves em baixas concentrações. Não são recomendadas para aplicações em ambientes úmidos e contato com substâncias alcalinas. (Ex: soda cáustica, cloro, produtos de limpeza, sabão e detergente). A velocidade de trabalho indicada é até 4km/h.

  • GSA-GMA – NU – MOLDED POLYURETHANE

    Load capacity up to 550Kg

    RIG

    Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    NU – Molded polyurethane with Nylon Wheel Center. Hardness: 90 Shore A. (-40°C to +80°C).

    Produced with a molded polyurethane tread and injected nylon wheel center. The mechanical bond system ensures excellent resistance and service life. Ideal for applications on various surfaces and environment types. They are light, withstand high loads, protect the floor, require less effort to handle and produce low noise level during handling. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They may be used in a speed up to 4km/h.

  • L10 Caster Schioppa – BP – PVC

    Load capacity up to 40Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent costbenefit ratio. Nominal working speed is up to 4km/h.

  • L10 Caster Schioppa – C – CELERON

    Load capacity up to 80Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    C – Celeron Hardness: 103 Rockwell M. (-30°C to +120°C).

    Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h.

  • L10 Caster Schioppa – F – CAST IRON

    Load capacity up to 80Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).

    Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.

  • L10 Caster Schioppa – NP – POLYPROPYLENE

    Load capacity up to 70Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    NP – Polypropylene Hardness: 65 Shore D. (-20°C to +70°C).

    Injected with recyclable polypropylene copolymer wheel center and tread. Indicated for light and medium loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h. Produced with recycled materials.

  • L10 Caster Schioppa – NPP – POLYPROPYLENE

    Load capacity up to 60Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    NPP – Polypropylene. Hardness: 65 Shore D. (-20°C to +70°C).

    Produced with single injection recyclable polypropylene copolymer. Indicated for light loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h.

Showing 1–20 of 679 results