• L14-S14 – PMN – MOLDED RUBBER

    Load capacity up to 120Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    RODA

    PMN – Molded Rubber With Polypropylene Whell Center: 80 Shore A. (-20°C to +70°C).

    Produced with solid rubber tread, with injected polypropylene wheel center. They are light and resistant, withstand humidity, have a soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.

  • L14-S14 – SP – SOFT RUBBER

    Load capacity up to  125Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10°C to +50°C).

    Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.

  • L14-S14 – TB – THERMOPLASTIC RUBBER

    Load capacity up to 125Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    RODA

    TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20°C to +70°C).

    Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.

  • L14-S14 – TP – THERMOPLASTIC COMPOUND

    Load capacity up to 150Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • L14-S14 – UP – THERMOPLASTIC POLYURETHANE

    Load capacity up to 165Kg

    RIG

    Made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.

    Wheel

    UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).

    Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.

  • LA10 Caster SChioppa – BP – PVC

    Load capacity up to até 40Kg

    RIG

    Made of stamped steel with single ball raceway and a Chrome-Plated finish. Rivetted wheel axle.

    Wheel

    This series has all types of thermoplastic wheels.

  • Ball Caster Schioppa
    Schioppa Ball Caster – NP Polypropylene

    Load capacity up to 40Kg

    RIG

    Made of stamped steel with single ball raceway and a Chrome-Plated finish. Rivetted wheel axle.

    Wheel

    NP – Polypropylene Hardness: 65 Shore D. (-20°C to +70°C)

    Injected with recyclable polypropylene copolymer wheel center and tread. Indicated for light and medium loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h. Produced with recycled materials.

  • Colorgel Caster Schioppa
    Schioppa Colorgel Caster – Transparent Thermoplastic Polyurethane

    Load capacity up to 60Kg

    RIG

    Made of stamped steel with single ball raceway and a Chrome-Plated finish. Rivetted wheel axle.

    Wheel

    Colorgel – Transparent Thermoplastic Polyurethane Hardness: 90 Shore A. (-20°C to +70°C).

    Injected with a polyurethane lining and acrylic wheel center with several combinations of colors. Indicated for furniture, rolling very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Produced with recycled materials.

  • Schioppa Decorative Caster – NPP Polypropylene

    Load capacity up to 40Kg

    RIG

    Made of nylon with several color options. Swiveling is done by a central ball point. Crimp wheel axle.

    Wheel

    NPP – Polypropylene. Hardness: 65 Shore D. (-20°C to +70°C).

    Produced with single injection recyclable polypropylene copolymer. Indicated for light loads, roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Nominal working speed is up to 4km/h.

  • Schioppa Evolution Caster – BP Thermoplastic Compound with PVC

    Load capacity up to 100Kg

    RIG

    Made of natural nylon 6.0 with double ball raceway.

    Wheel

    BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • Schioppa Futura Caster
    Schioppa Futura Caster – BP Thermoplastic Compound with PVC

    Load capacity up to 100Kg

    RIG

    Made of natural nylon 6.0 with 30% of fiber glass and double ball raceway.

    Wheel

    BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to +50°C).

    Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

  • Rodaja Single Schioppa
    Schioppa Single Caster – Polyethylene

    Load capacity up to 15Kg

    RIG

    Made of nylon with several color options. Swiveling is done by a central ball point.

    Wheel

    Single – Polyethylene. Hardness: 80 Shore A. (-20°C to + 70°C).

    Injected with a polyethylene tread and polypropylene copolymer wheel center with several combinations of colors. Indicated for furniture, they roll very easily, requiring low handling effort, resistant to deformation under static loads, with an excellent cost-benefit ratio. They present a good resistance to chemicals and moderate impacts. Produced with recycled materials.

  • Schioppa Stilus Caster
    Schioppa Stilus Caster – BP Thermoplastic Compound with PVC

    Load capacity up to 70Kg

    RIG

    Structure made of reinforced nylon polyamide with fiberglass fill. Riveted wheel axle.

    Wheel

    BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to + 50°C).

    Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.

Showing 41–53 of 53 results