PMX – Rubber (Rim) Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws enabling the mounting and replacement of their components that may be supplied separately.
PAC – Molded Polyurethane – High Hardness. Hardness: 60 Shore D. (-40ºC to + 80ºC). Produced with a high hardness molded polyurethane tread and grey cast iron wheel center. Ideal for more severe applications on various surface and environment types. They withstand heavy loads, protect the floor, requiring less effort to be handled, enabling equipment maneuvering and handling. They produce a low noise level when rolling and have an excellent service life. They have an excellent mechanical resistance and are resistant to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h when mounted with ball bearings.
B – Molded Rubber. Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10ºC to + 50ºC). Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.