soon
RIT – Pneumatic – Stamped Plate Wheel Center (-20ºC to + 50ºC). Manufactured with tire and tube, with zinc-plated stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
PAC – Molded Polyurethane – High Hardness. Hardness: 60 Shore D. (-40ºC to + 80ºC). Produced with a high hardness molded polyurethane tread and grey cast iron wheel center. Ideal for more severe applications on various surface and environment types. They withstand heavy loads, protect the floor, requiring less effort to be handled, enabling equipment maneuvering and handling. They produce a low noise level when rolling and have an excellent service life. They have an excellent mechanical resistance and are resistant to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h when mounted with ball bearings.
TM – Termic. Hardness: 90 Shore D. (0ºC to + 200ºC). Manufactured in phenolic resin (bakelite), molded by heat and pressure. Indicated for utilization in high temperature environment applications. They have good mechanical properties, resistant to deformation under static loads and roll easily. They are resistant to most chemicals.
TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.