BD – Molded Rubber With Stamped Plate Wheel Center: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber tread, with zinc-plated stamped carbon steel wheel center. They are light and resistant, soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.
TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10ºC to + 50ºC). Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
NFV – Fiberglass-reinforced Nylon. Hardness: 80 Shore D. (-40ºC to + 180ºC). Produced with fiberglass-reinforced polyamide nylon 6.6. Indicated for utilization in high and low temperature applications. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Resistant to greases, oils, and some kinds of acids.
PMX – Rubber (Rim) Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws enabling the mounting and replacement of their components that may be supplied separately.