-
Schioppa Stilus Caster – BP Thermoplastic Compound with PVC
Load capacity up to 70Kg
RIG
Structure made of reinforced nylon polyamide with fiberglass fill. Riveted wheel axle.
Wheel
BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to + 50°C).
Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa Supermarket Caster – L Light
Load capacity up to 115Kg
RIG
-
Schioppa Supermarket Caster – LSM Reinforced
Load capacity up to 115Kg
RIG
LSM – Reinforced
-
Schioppa Supermarket Caster – NR Injected
Load capacity up to 100Kg
RIG
NR – Injected Hub
-
Schioppa Wheel AC – POLYURETHANE MOLDED
AC – Molded High Hardness Polyurethane – Round. Hardness: 60 Shore D. (-40ºC to + 80ºC). Produced with a high hardness molded green polyurethane tread over a grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to their polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. Nominal working speed is up to 20km/h.
-
Schioppa Wheel ALAC
soon
-
Schioppa Wheel ALBC
soon
-
Schioppa Wheel ALP
soon
-
Schioppa Wheel B – MOLDED RUBBER
B – Molded Rubber. Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa Wheel BC – POLYURETHANE MOLDED
BC – Molded Polyurethane – Round. Hardness: 90 Shore A. (-40ºC to + 80ºC). Produced with a molded polyurethane tread and grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to their polyurethane layer larger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa Wheel BD – MOLDED RUBBER
BD – Molded Rubber With Stamped Plate Wheel Center: 80 Shore A. (-20ºC to + 70ºC). Produced with solid rubber tread, with zinc-plated stamped carbon steel wheel center. They are light and resistant, soft and quiet rolling and are indicated for light duties on floors in good conditions. Nominal working speed is up to 4km/h.
-
Schioppa Wheel BMN – MOLDED RUBBER
BMN – Solid Tire – Nylon Wheel Center. Hardness: 80 Shore A. (-20ºC to + 70ºC). Manufactured with a solid rubber rim and injected nylon wheel center. Indicated for applications in irregular floors where handling easiness, impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately.
-
Schioppa Wheel BP – PVC
BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10ºC to + 50ºC). Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa Wheel BS – DOUBLE LAYERED MOLDED RUBBER
BS – Double-Layered Molded Rubber. Hardness: 80 Shore A. (-20ºC to + 70ºC). Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa Wheel C – CELERON
C – Celeron Hardness: 103 Rockwell M. (-30ºC to + 120ºC). Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h.
-
Schioppa Wheel DV – DECAUVILLE CAST IRON
DV – Decauville – Rail Iron. Hardness: 160 Brinell. (-40ºC to + 400ºC). Produced of grey cast iron, they present a flap on the tread side. Designed to be mounted on rails or girders. They roll easily, offering a great handling effort reduction. They are very resistant, withstanding high loads and temperatures.
-
Schioppa Wheel F – CAST IRON
F – Cast Iron. Hardness: 160 Brinell. (-40ºC to + 400ºC). Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.
-
Schioppa Wheel NFV – FIBERGLASS-REINFORCED NYLON
NFV – Fiberglass-reinforced Nylon. Hardness: 80 Shore D. (-40ºC to + 180ºC). Produced with fiberglass-reinforced polyamide nylon 6.6. Indicated for utilization in high and low temperature applications. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Resistant to greases, oils, and some kinds of acids.
Showing 161–180 of 223 results
