-
Schioppa GSA-GMA Caster – F – CAST IRON
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).
Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.
-
Schioppa GSA-GMA Caster – ME – MOLDED POLYURETHANE
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
ME – Double tread Molded Polyurethane – Round. Hardness: side 60 Shore D and center 90 Shore A. (-40°C to +80°C).
Produced with a double tread molded polyurethane, with green colored high hardness cheeks and softer orange colored polyurethane center, over a grey cast iron wheel center. Round tread profile offers a reduced floor contact area, easiness for handling and maneuvering, reducing handling effort and low rolling noise level. They offer a superior service life due to its polyurethane layer lvarger than conventional wheels. They have an excellent resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. Higher hardness wheel side faces allow for a higher resistance to impacts and a softer center a higher floor friction with a lower handling noise level. They may be employed in a speed up to 4km/h.
-
Schioppa GSA-GMA Caster – NT – TECHNICAL NYLON
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
NT – Technical Nylon. Hardness: 75 Shore D. (-40°C to +110°C).
Produced with high quality nylon 6.0 tread and wheel center. They are light and have an excellent mechanical resistance, roll very easily, requiring less effort in maneuvering and handling. Ideal for applications in wet environments, they are resistant to greases, oils, salts and some kinds of acids. Manufactured of recycled material. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – P – MOLDED POLYURETHANE
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).
Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 4km/h.
-
Schioppa GSA-GMA Caster – RIT – PNEUMATIC
Load capacity up to 70Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
RIT – Pneumatic – Stamped Plate Wheel Center (-20°C to +50°C).
Manufactured with tire and tube, with zinc-plated stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – RIT PP – PNEUMATIC
Load capacity up to 70Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
RIT PP – Pneumatic – Nylon Wheel Center. (-20°C to +50°C).
Manufactured with tire and tube and nylon injected wheel center. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – SP – SOFT RUBBER
Load capacity up to 300Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
SP – Extra Soft Thermoplastic Rubber. Hardness: 65 Shore A. (-10°C to +50°C).
Injected recyclable thermoplastic extra soft rubber tread and polypropylene copolymer wheel center. Its advantages are the extremely low noise level and vibration reduction. Indicated for light load handling, they offer an excellent floor protection and regular resistance to impacts and chemicals. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – STR – THERMOPLASTIC RUBBER
Load capacity up to 250Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
STR – Thermoplastic Rubber. Hardness: 70 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic rubber tread and polypropylene copolymer center. Wheel tread profile has a grooved pattern enabling a better adherence in external and internal floors. They offer a soft and quiet rolling, excellent floor protection, good chemical resistance, and wear and impact resistance. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – TB – THERMOPLASTIC RUBBER
Load capacity up to 300Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – TP – THERMOPLASTIC COMPOUND
Load capacity up to 300Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10°C to +50°C).
Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa GSA-GMA Caster – UP – THERMOPLASTIC POLYURETHANE
Load capacity up to 550Kg
RIG
Reinforced rig, made of stamped steel plate and swivel head with double ball raceway, zinc-plated finish. Bolted wheel axle.
Wheel
UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.
-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PC
Load capacity up to 300Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PC – Pneumatic – Stamped Plate Wheel Center (-20°C to +50°C).
Manufactured with tire and tube, with painted stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4 km/h.
-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PP
Load capacity up to 220Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PP – Pneumatic – Nylon Wheel Center. (-20°C to +50°C).
Manufactured with tire and tube and nylon injected wheel center. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
-
Schioppa PMX Caster – Solid Tire Axial – PMR – SOLID TIRE
Load capacity up to 500Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PMX – Solid Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).
Produced with black solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws, enabling the mounting and replacement of their components that may be supplied separately.
-
Schioppa Stilus Caster – BP Thermoplastic Compound with PVC
Load capacity up to 70Kg
RIG
Structure made of reinforced nylon polyamide with fiberglass fill. Riveted wheel axle.
Wheel
BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to + 50°C).
Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa Zafira Caster – BP Thermoplastic Compound with PVC
Load capacity up to 100Kg
RIG
RIG 100: Made of polyamide nylon 6.0 ice color, with a single ball raceway. RIG 125: Made of polyamide nylon 6.0 ice color, with a ball bearing in the raceway.
Wheel
BP – Thermoplastic Compound with PVC. Hardness: 80 Shore A. (-10°C to + 50°C).
Produced with recyclable thermoplastic compound with PVC tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, great floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
SPECIAL SOLUTIONS – 3″ caster with reinforced rig
For application in equipment up to 1200 kg with overall height constraints GPKX 316 NTE
Showing 41–60 of 69 results
