-
Schioppa MX Caster – Axial Medium – TB – THERMOPLASTIC RUBBER
Load capacity up to 400Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
TB – Thermoplastic Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastic rubber tread and polypropylene copolymer wheel center. They present an excellent floor protection, soft and quiet rolling, easiness to handling and maneuvering, impact resistance, have a low deformation index under load and excellent abrasion resistance. They have a good resistance to weathering and chemicals such as salts and greases. Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – TP – THERMOPLASTIC COMPOUND
Load capacity up to 400Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
RODA
TP – Thermoplastic Compound. Hardness: 80 Shore A. (-10°C to +50°C).
Produced with recyclable thermoplastic compound tread and polypropylene copolymer wheel center. They offer a soft and quiet rolling, excellent floor protection, good chemical, wear and impact resistance, resulting in an excellent cost-benefit ratio. Nominal working speed is up to 4km/h.
-
Schioppa MX Caster – Axial Medium – UP – THERMOPLASTIC POLYURETHANE
Load capacity up to 700Kg
RIG
Made of steel with a painted finish and swivel section with two axial ball bearings. Bolted wheel axle
Wheel
UP – Thermoplastic Polyurethane. Hardness: 90 Shore A. (-20°C to +70°C).
Produced with recyclable thermoplastic elastollan polyurethane tread and polypropylene copolymer wheel center. Ideal for those who look for an excellent load capacity added to great floor protection with low noise rolling, offering an excellent resistance to abrasion and impacts. Resistant to greases, mineral oils and some acids. Nominal working speed is up to 4km/h.
-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PC
Load capacity up to 300Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PC – Pneumatic – Stamped Plate Wheel Center (-20°C to +50°C).
Manufactured with tire and tube, with painted stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4 km/h.
-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PP
Load capacity up to 220Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PP – Pneumatic – Nylon Wheel Center. (-20°C to +50°C).
Manufactured with tire and tube and nylon injected wheel center. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
-
Schioppa PMX Caster – Solid Tire Axial – PMR – SOLID TIRE
Load capacity up to 500Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PMX – Solid Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).
Produced with black solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws, enabling the mounting and replacement of their components that may be supplied separately.
-
Schioppa Supermarket Caster – L Light
Load capacity up to 115Kg
RIG
-
Schioppa Supermarket Caster – LSM Reinforced
Load capacity up to 115Kg
RIG
LSM – Reinforced
-
Schioppa Supermarket Caster – NR Injected
Load capacity up to 100Kg
RIG
NR – Injected Hub
Showing 81–89 of 89 results