-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PC
Load capacity up to 300Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PC – Pneumatic – Stamped Plate Wheel Center (-20°C to +50°C).
Manufactured with tire and tube, with painted stamped carbon steel plates. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer an easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4 km/h.
-
Schioppa PCX Caster – Pneumatic Axial – PNEUMATIC PP
Load capacity up to 220Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PP – Pneumatic – Nylon Wheel Center. (-20°C to +50°C).
Manufactured with tire and tube and nylon injected wheel center. Indicated for applications in irregular floors where handling easiness, and impact and vibration damping is required. They offer easy maintenance, and their components can be supplied separately. Nominal working speed is up to 4km/h.
-
Schioppa PEX Caster – Heavy Extra Axial – B – MOLDED RUBBER
Load capacity up to 1500Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
B – Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa PEX Caster – Heavy Extra Axial – BS – MOLDED DOUBLE RUBBER
Load capacity up to 1500Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
B – Molded Rubber. Hardness: 80 Shore A. (-20°C to +70°C).
Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa PEX Caster – Heavy Extra Axial – C – CELERON
Load capacity up to 1700Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
C – Celeron Hardness: 103 Rockwell M. (-30°C to +120°C).
Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h.
-
Schioppa PEX Caster – Heavy Extra Axial – F – CAST IRON
Load capacity up to 2000Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
F – Cast Iron. Hardness: 160 Brinell. (-40°C to +400°C).
Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.
-
Schioppa PEX Caster – Heavy Extra Axial – P – MOLDED POLYURETHANE
Load capacity up to 2800Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to +80°C).
Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa PMX Caster – Solid Tire Axial – PMR – SOLID TIRE
Load capacity up to 500Kg
RIG
Reinforced rig, made of carbon steel with stamped and machined parts, swivel section with two axial ball bearings. Painted finishing. Bolted wheel axle.
Wheel
PMX – Solid Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).
Produced with black solid rubber rim and stamped carbon steel plates for the flanges (wheel center). They do not require maintenance, they do not go flat, easily rolling under obstacles and are indicated for use on irregular floors. Flanges are secured by screws, enabling the mounting and replacement of their components that may be supplied separately.
-
Schioppa PX Caster – Super Heavy Axial – B – MOLDED RUBBER
Load capacity up to 750Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
B – Molded Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).
Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa PX Caster – Super Heavy Axial – BS – MOLDED DOUBLE RUBBER
Load capacity up to 900Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
BS – Double-Layered Molded Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).
Produced with molded double-layered vulcanized rubber tread over a grey cast iron wheel center. Ideal for external floor applications, offer a great shock and vibration absorption, high resistance to abrasion and longer service life due to their thicker rubber layer. Resistant to chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa PX Caster – Super Heavy Axial – C – CELERON
Load capacity up to 1000Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
C – Celeron Hardness: 103 Rockwell M. (-30°C to + 120°C).
Manufactured with a compound obtained from macerated cotton fibers drenched with phenolic resin, molded by heat and pressure. They have excellent mechanical properties, are light and rugged, resistant to deformation under static loads and roll easily. They can be used over a wide temperature range. They are resistant to mild oils, greases and acids in low concentrations. Not recommended for applications in wet environments in contact with alkaline substances. (e.g., caustic soda, chlorine, cleaning products, soap and detergent). Nominal working speed is up to 4km/h
-
Schioppa PX Caster – Super Heavy Axial – F – CAST IRON
Load capacity up to 1400Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
F – Cast Iron. Hardness: 160 Brinell. (-40°C to + 400°C). Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.
-
Schioppa PX Caster – Super Heavy Axial – NM – SOLID NYLON
Load capacity up to 1400Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
NM – Solid Nylon. Hardness: 70 Shore D. (-40°C to + 110°C).
Produced from nylon 6.0 bars. They are light weight, with a good mechanical resistance, roll very easily, requiring less effort in handling and maneuvering, under static loads are resistant to deformation. They withstand light and heavy loads maintaining equipment handling easiness. Ideal for applications in wet environments, they are resistant to chemicals, greases, oils, salts and some kind of acids. Nominal working speed is up to 4km/h.
-
Schioppa PX Caster – Super Heavy Axial – P – MOLDED POLYURETHANE
Load capacity up to 1400Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to + 80°C).
Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa YPEX Caster – B – MOLDED RUBBER
Load capacity up to 2000Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
B – Molded Rubber. Hardness: 80 Shore A. (-20°C to + 70°C).
Produced with molded vulcanized rubber tread over a grey cast iron wheel center. They roll softly with a low noise level, absorb shocks and vibrations. They are resistant to abrasion and chemicals. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
Schioppa YPEX Caster – F – CAST IRON
Load capacity up to 3800Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
F – Cast Iron. Hardness: 160 Brinell. (-40°C to + 400°C).
Produced with grey cast iron, they roll easily offering a great handling effort reduction. They are very resistant withstanding high loads and temperatures. They are not indicated to utilization when noise level and floor maintenance are required.
-
Schioppa YPEX Caster – P – MOLDED POLYURETHANE
Load capacity up to 3800Kg
RIG
Reinforced rig, made of carbon steel, swivel section with axial ball bearing and taper roller bearings. Painted finishing Bolted wheel axle.
Wheel
P – Molded Polyurethane. Hardness: 90 Shore A. (-40°C to + 80°C).
Produced with a molded polyurethane tread and grey cast iron wheel center. Ideal for applications on various surfaces and environment types The withstand high loads, protect the floor, require less effort to handle, produce low noise level during handling, and have an excellent service life. They have great resistance to abrasion, impacts, weathering and chemicals such as greases, oils, salts and solvents. They can be used at a speed of up to 20km/h when mounted with ball bearings.
-
SPECIAL SOLUTIONS – 3″ caster with reinforced rig
For application in equipment up to 1200 kg with overall height constraints GPKX 316 NTE
Showing 61–80 of 90 results
